An editorial note: Inner & Outer Bleeders
When I started working on the calipers, it was my first time doing so. In addition, it was the first time I had ever bled brakes on a car. The …
An editorial note: Inner & Outer Bleeders Read More1971 C3 Stingray Project

When I started working on the calipers, it was my first time doing so. In addition, it was the first time I had ever bled brakes on a car. The …
An editorial note: Inner & Outer Bleeders Read More
With the brake lines in and the calipers rebuilt, it was time to bleed the brakes. I opted for the old two person method so I grabbed my son and …
Bleeding the brakes Read More
With the calipers rebuilt, it was time work on replacing the proportioning valve, caliper brake lines and the cross front brake line. It seemed pretty straight forward right until I …
Brake lines and Proportioning Valve Install Read More
Once the parts came in, I started in on rebuilding the calipers. The back seals and pistons were not to bad when I opened them up. The calipers all had …
Rebuilding the Calipers Read More
In the last post I talked about the master cylinder rebuild and the fact that the rebuild ultimately did not allow the brakes to bleed. While trying to diagnose the issue, …
Calipers, brake lines and proportioning valve, stop me if you’ve heard this one. Read More
With the car running well, the last piece of the puzzle was getting the brakes to work. In preparation for bleeding the brakes, I filled the master cylinder and didn’t …
Master Cylinder Rebuild Read More
Well, I learned a good lesson this weekend in patience and common sense. Friday night I went out an picked up a master cylinder bleed kit, a brake bleed kit …
Pro tip: Check all the fluids when the car has been sitting for 23+ years…. Read More